Add AUX to old radio with a USB converter to plug the light.
start for the fermented fish
1. box to add to Aux. The view from the subject today.
2. manage to buy a USB converter to plug the car light. Now feel that the price about $7 (The non-take in the otherwise will be expensive than the hundreds) of thousands picture looks as . The top barrel sold much of it.
3rd separate parts to no emphasis on it and then gradually to see if it contains otherwise work at the assembly parts แน่ ops will see the picture. Split 3-piece about any major contract, we will draw a line in
4 in a box to call Sterio to cut half a line (it is a large dog and 2 small side but not a coincidence that we use big. To end the third case a small line and then soldering the legs of the platform calls for a three-legged on will note that it will write a letter from top to bottom as punching RCH, GND, LCH lines we use to cut soldering. Black is GND to switch only one other color.
5th hole before soldering to the device under a hundred lines up before then then make a loop knot hit extract then soldering. Beware any more because it is the other very small. Use a soldering iron point (more than 3 lines to end the half hour ops).
6 We will continue with any set of USB AUX U.S. $ 350 in price.
Pl. This machine can use USB / SD / MMC if any who try to help a bit to see this is a stem Input Sterio with the view and do not forget I am sure it will have to stem from Audio Signal. or because it is Input But who do try to gauge it by and take a small stem that we cut line and then plug headphones speakers take sound try if it is functional and will be easy with no need to dismantle .
See the sheet Sprint. The stem of the float line both side flip pages - will be after viewing เจอ.
It will write the abbreviation. Each machine may not be the same. But it will be writing this.
RCH = Right Channel.
LCH = Left Channel.
G = Ground.
