Omron CX OPC server Communication Setup Procedure
Everything you do Omron CX-Server OPC is to define *. CDM is set to CX-Server file with defined points. You can create files *. CDM CX-data, Omron CX-Programmer or Project Editor (start when double-click the *. CDM). This is the procedure:
1st CX-OPC Server starts, right-click the toolbar, click Select CX-Server Project, then select *. CDM. This is what you have done already. Edit the project can add or subtract points, faces change. You can not set any refresh rate. Click OK.
2nd commencement of any OPC client. I started with CX-data, which is Omron SCADA. Create a point here, for example test point, I / O characteristics of the selected OPC / Other, then the dialog Apperson. On the server, click the box, select Add Omron CX-OPC communications management, a dialog box appears, select the OPC server (for Omron is OMRON.OpenDataServer.1), create a project file (click again). In this project, the file will be saved with the group set the refresh rate. This is a picture on the left.
3rd in the same dialog box (OMRON CX OPC Communications Control Properties), click Groups OPC / components, right-click in the left pane, click Add Group. You can set the refresh rate for all group elements. then right click in the left pane, click Add Item, and you can select one or more points already defined in the *. CDM, add to the group.
4th then select from this group, which will be a source of evidence for our position from the beginning.
connection to Omron CX-CX-OPC Server data you must install the Omron CX-Server OPC client machine CX-Supervisor. Only then will OMRONCXOPCCommunicationControl.
The procedure should be identical to any OPC client software.
