Omron PLC Center

Many people would never write a program to screen Touch screen to control machinery ago
Today I have a Smart Active Parts (SAP) to guide many people may wonder if Smart Active Parts (SAP) is what I tell it that the Smart Active Parts are screenshots ready-made for use in contact communication products omron.
The pre-installed on the CX-Designer software to easily and quickly in order to create a screen to control equipment.
The omron were prepared screen finished up the already only user selected device model of omron.
To be connected to the Touch Screen and then drag out the screen ready to be prepared already to put on screen.
You also display as you want.

We view the properties of the Smart Active Parts (SAP) what do together.

Smart Active Parts are function of communicating with the Omron device to the replete Like Temperature Controller, PLC, Servo, or other devices.
Smart Active Parts can be used with other devices. Same type of equipment or several. The installation address, or Unit No. To match each device you want to contact

Configuration and status of the NC and DRT2 (remote device) to communicate more random and can be configured using various Servo ready to screen it.
We will use Smart Active Parts with what equipment (eg Smart Active Parts Ver. 6.0).

1.CS / CJ and CS1D CPU Unit Error Log shows status change button status of the Battery.
2.Serial Communication Board / Unit status communication (Error Monitor) port settings.
3.Ethernet Unit / CLK Unit status communication (Error Monitor, Network node status).
4.MC / MCH Unit JOG running search starting position. Program status, the status Error, the status I / O, status PV.
5.NC / NCF Unit JOG running, Direct Running, memory running (NC only) status Error, the status I / O, status PV.
6.Servo (R88D-WT, R7D-AP) using new SCU / SCB board status PV, parameters, status Error, data Driver, the status I / O.
7.Device Net (DRT2-xx) status DRT2, data IN / OUT.
8.Temperature Controller (E5 [] R, E5ZN, E5 [] N, EJ1) to direct status with NS Run, set PID, set SP, set the Alarm.
9.Invertor control the rotation, the status Output, set parameters.

Preview Use Smart Active Parts (SAP) to create a screen. Control and monitor devices for the Temperature Controller Omron.

How to Use Smart Active Parts.

1. Open CX Design.

2. A version of the screen to use.

3. A device to communicate

4. Go to the Toolbar menu, select Tools menu and then select Library.

5. A window to the SAP Smart Active Parts_E menu and then select the device to communicate

6. Select the screen you want and then dragging it to the Screen.

7. Double click to bring up Properties window for that device.

8. Address or the Host contacts the device to match our first set.

Use Smart Active Parts is a way to reduce the programming steps that users can use the screen that comes ready for without having to waste time writing a new screen. . And you can write with more screens. Allows users to communicate with a very good.

Share This