Omron PLC Center

CP1W-CIF41 the Option Board for the PLC model CP1L/CP1H can use the Ethernet Option Board enables Transfer data between CX-Programmer PLC and also to quickly and easily CIF41 is also capable of working with the command or FINs Protocal FINs with.

Equipment
1) PLC model CP1L/CP1H CPU.
2) CP1W-CIF41.

How to use.
1. Turn off lights and install PLC CP1W-CIF41 on Slot 1 or Slot 2 can only be the only one. From the sample was installed on Slot 2.

2. And then to set Differ switch Pin 5 = On (Port 2 = Auto).

3. Power to the PLC.

4. Set IP Address to the computer. Right-click and select Properties on Local Area Connection.

5. Select Properties of Internet Protocal (TCP / IP).

6. Select Use the following IP address: and enter the IP address: 192.168.250.2 (because CP1W-CIF41 valuable IP address: 192.168.250.1 from the factory).
Subnet mask: 255.255.255.0.

7. When the IP address of LAN card and check the settings of the LAN Setting, Internet Explorer, open the Internet Explorer program and select the menu Tools> Internet Options and then select the tab Connections.

8. Click LAN settings window will appear Local Area Network (LAN) Settings up to remove the check mark out and then press the OK.

9. Lan cable between the computer and the PLC will continue to successfully use the Lan cable connected to the Hub that line do not cross directly through the Hub at all.

10. Open Internet Explorer and type http://192.168.250.1/e00.htm.

11. Enter Login Password: “ETHERNET” and click Login.

12. The Login Password screen will be as follows.

13. Setting menu screens are as follows.

14. Select the System menu screen System Format.

15. To change the IP Address and press the Transfer button to save changes to the CP1W-CIF41.

Share This