Everything you do Omron CX-Server OPC is to define *. CDM is set to CX-Server file with defined points. You can create files *. CDM CX-data, Omron CX-Programmer or Project Editor (start when double-click the *. CDM). This is the procedure:
1st CX-OPC Server starts, right-click the toolbar, click Select CX-Server Project, then select *. CDM. This is what you have done already. Edit the project can add or subtract points, faces change. You can not set any refresh rate. Click OK.
2nd commencement of any OPC client. I started with CX-data, which is Omron SCADA. Create a point here, for example test point, I / O characteristics of the selected OPC / Other, then the dialog Apperson. On the server, click the box, select Add Omron CX-OPC communications management, a dialog box appears, select the OPC server (for Omron is OMRON.OpenDataServer.1), create a project file (click again). In this project, the file will be saved with the group set the refresh rate. This is a picture on the left.
(more…)
Tags: CX OPC server, CX Programmer, cx server, CX Supervisor, omron cx, omron cx opc, omron cx server, plcCX OPC server, CX Programmer, cx server, CX Supervisor, omron cx, omron cx opc, omron cx server, plcShare This
(more…)