Project Issue:

water tank lavel system

Water-Tank System Level Controller See control of water level in a reservoir. The entrance to the pressure transducer, Vp, a full tank varies between 0V (empty tank) and 5V (). An output voltage, Vo, a valve will change the situation, the rate of filling tanks. Vo varies between 0V (no water) flow) and 5V (maximum flow. The system will always be: “Emergency is electrically connected. The desired height of the container is indicated by a different voltage, VD. The output voltage is measured by Vo = 0.5 (VD - Vp). When the output voltage is greater than 5 V be 5V, and below 0V 0V. (more…)

Tags: liquid level float switches, , , , , , , liquid level gauge, liquid level sensor, PLC ladder Exemple, PLC programming, Tank System Level Controller, tank water level indicator

Share This