Omron PLC Center

Welcome back to om-ron plc dot com again today we have information about SCADA technology to present .
Most readers will readily agree that the industry went through a period of considerable change over the last 10-15 years. In other words, the design and implementation of automation and control has changed in this period.

When the electronic devices were first used in automated factories, the vast majority of sensors and control systems were autonomous, or communicated only through their own networks or simple serial interfaces like RS-232, RS -485 or current loop. The idea of ​​connecting these systems together, or systems management company, was out of the question. Why would you do?

But in the year 1990, Microsoft Windows * moved to a stable platform 32-bit Windows was supported Ethernet and TCP / IP takes as a communication technology. Dit betekende providers of operating systems can build their products on top of a low-cost, high performance platform, resulting in systems that are not only very rich and capable on their own, but it can also easily interface with existing enterprise dates as managing the business. (more…)

Tags: Ethernet, OPC, RS 485, RS 232, SCADA, scada software, SCADA system, scada technologyEthernet, OPC, RS 485, RS 232, SCADA, scada software, SCADA system, scada technology

Share This

Welcome back to Om-ron PLC dot com , Last time we mentioned the maintenance of PLC in the Relay output. In the event that lead to the induction load. That require additional protection circuit. From now on, we have learned circuit protection first then there is the use of electronic equipment, electronics, called RC (RC Method) well then come to learn each other to the protection circuit in the lead. relay output to the load to the induction of a second. That is the use of electronic equipment, electronics, called a diode.

2. Diode Method.

Circuit of the use of diode circuits can be found in Figure 1, below.

For this method, we use a diode parallel to the load on the circuit. When the touch of a Three layout of the PLC input will work with current flowing through the contacts of the relay to the load. The direction of current flow in a stream running through to the positive load. (Which is a load inductance) to stop with the negative terminal of supply. The magnetic field points in the load inductance. Make the work load. In the diode-stroke does not affect anything because the timing circuits reason that the diode itself to be bias. But when the Tree Layout output to stop working. (Contact output layout of the Three separate instantaneously) in the stroke itself, this magnetic field that points in the load inductance is caused to emit energy. In the moment of birth itself will emit this energy at a voltage proportional to flow rate changes. Resulting voltage across the contacts of the Tree layout output (transient). (more…)

Tags: Contact output, CP1L, CR method, maintenance PLC, OPC, output unit, plc, plc output, PLC Product, PLC training, SCADA, Use PLC Contact outputContact output, CP1L, CR method, maintenance PLC, OPC, output unit, plc, plc output, PLC Product, PLC training, SCADA, Use PLC Contact output

Share This

Regarding more questions about Fins Gateway Protocal Dot NET Class library Lastest version of Omron PLC such as thus as below.
-Is FGW2003 the latest revesion? ,
-Does it support PLC CJ2 or What about USB ?
-Will we still look to develop using the .net class library with visual studio ?
-Windows XP , ,Windows 7 and Windows Vista support … ?
From questions above ,today We have answer for you .

The latest version is now supported SYSMAC Gateway both fins and CIP protocols EthernetIP & CJ2 .
SYSMAC Gateway is enabled. It includes both the CIP and fins driver.
It supports CJ2 FINNISH over Ethernet, EIP, USB. USB is also supported for CP1H / CP1L.
It works on XP and Vista (both 32-bit), but not 64-bit editions.
It also works on Server 2003.
There is a new Active X control for SYSMAC CX Gateway called Compolet (. Net only) with the reading of the tag name. Currently no OPC server to read tag name.
I wished for more information and screenshots, if necessary.

The biggest thing SYSMAC Gateway brings to the table in the EIP in the world the way the PC (SYSMAC Event Gateway memory) must lead in the PLC tag data to participate.
This brings the data directly to the PC and applications referred to the store with a Gateway fin on Net 0, node 0, Unit 0th

FINNISH gateway, the gateway to the world of the “Finnish (Windows), Version 1.0, when released in Japan.

Now that the CIP TOOLBUS, SYSWAY (Host Link), SYSWAY curriculum vitae (CV-mode Host Link) and fins (Ethernet, Controller Link, SYSMAC Link) are all supported, the name was changed to “SYSMAC Gateway. The gateway to the world of the “SYSMAC. (more…)

Tags: Fins, Fins Gateway, Gateway, OPC, PLC Product, PLC programming, PLC software, SYSMAC, SYSMAC CX, SYSMAC GatewayFins, Fins Gateway, Gateway, OPC, PLC Product, PLC programming, PLC software, SYSMAC, SYSMAC CX, SYSMAC Gateway

Share This