Omron Industrial Automation Product.


PLC ladder Exemple and Motor and PLC programming03 Mar 2011 08:36 am

PLC Programming for Servo Motor Control with Omron CP1H

Today,PLC exemple programming will be present control servo with PLC CP1H connect to Omron Servo Driver (Smart Step)
1. Run Omron CX-programmer and then select [File] -> [New] menu appears dialog block as shown below.

CX programmer Server motor

2. Select [CP1H] from the Device Type.

CX programmer Server motor

Click [Settings] dialog block “Device Type Settings” will show the following. (more…)

Tags: Control servo motor, , , , , , , , , , , CP1H, CX Programmer, Motor, Omron CP1H, PLC CP1H, PLC ladder Exemple, PLC programming, Servo Driver, servo motor, Smart Step

Share This

No Comments »
PLC ladder Exemple and PLC programming01 Dec 2010 08:45 pm

PLC Programming Example#14 : How to enlarge the counting range

The counting range for a 16-bit is 0 ~ 32,767.
The use of two counters can increase the range of counting n1 * n2.
When the counter reaches count N1 C5, C6 will begin counting at a given time and to reset the counting pulses X13.
When the counting of the counter reaches C6 n2, the pulses of input X13 is n1 * n2.

plc example 14

Tags: Counter, , , , , enlarge, plc example, PLC ladder Exemple, PLC programming

Share This

No Comments »
PLC ladder Exemple and PLC programming29 Nov 2010 07:56 pm

PLC Programming Example#13 : Delay Timing extension Ladder diagram

The total delay of input X0 is closed to outputY1 enabled = (n1 + n2) T * T. refers to the clock cycle.

plc ladder example 13

Tags: delay timing, , , , , Delay Timing extension, PLC ladder Exemple, PLC programming, PLC Timer

Share This

No Comments »

« Previous Page — Next Page »

eXTReMe Tracker
© Copyright 2007 Omron PLC Center. All rights reserved.

Close
E-mail It